Jumbo frames on Quanta LB6M

Posted on by

Enable jumbo frames for layer2 traffic:

(FASTPATH Routing) #config

(FASTPATH Routing) (Config)#interface 0/1-0/28

(FASTPATH Routing) (Interface 0/1-0/28)#mtu 9216

(FASTPATH Routing) (Interface 0/1-0/28)#exit

(FASTPATH Routing) (Config)#exit

Enable jumbo frames for routed traffic:

(FASTPATH Routing) #show ip interface brief

Interface    State  IP Address      IP Mask         Method
----------   -----  --------------- --------------- -------
2/1          Up     130.240.207.3   255.255.255.0   Manual

(FASTPATH Routing) (Config)#interface 2/1

(FASTPATH Routing) (Interface 2/1)#ip mtu 9198

Remember to save your config:

(FASTPATH Routing) #write mem

This operation may take a few minutes.
Management interfaces will not be available during this time.

Are you sure you want to save? (y/n) y

Config file 'startup-config' created successfully .

Configuration Saved!